How Low Should It Go? How To Hang and Install Light Fixtures

Tags

, , , , , ,


Hanging Light Fixtures Dining Room with Botanical Prints

For a chandelier that will hang over a table:

  • The width of the chandelier should be about 1/2 to 2/3 the width of the table it will be hanging over.
  • The width of the chandelier should be about a foot less than the width of the table at its widest point.
  • The bottom of the chandelier should hang between 30″ – 36″ above the surface of the table when there is an 8′ ceiling. For higher ceilings, you can hang the chandelier up to 3″ higher for each additional foot of ceiling.

For overhead fixtures in rooms such as a living room or entry way that are not hanging over a table:

  • To determine a good width for your light fixture, measure the length and width of the room in feet and add those two measurements together – the number that you come up with is, in inches, a good appropriate width (For example, if your room measures 10 feet x 15 feet, add 10 + 15 to get 25. A 25″ wide fixture would be appropriate for this space.) For rooms with high ceilings, you can add up to 6″ or more to the width of the chandelier.
  • To determine a good height for your light fixture, multiply the height of your ceiling (in feet) by 2.5 and by 3. The height of your fixture should be, in inches, somewhere in this range. (For example, if you have 8 foot ceilings, 8 x 2.5 = 20 and 8 x 3 = 24. An appropriate height for your light fixture would be between 20″ and 24″ when measured from the ceiling to the bottom of the fixture).
  • An overhead fixture that will be walked under, such as in the entry, should hang 7 feet or more above the floor.

DSC_4591

Follow

Get every new post delivered to your Inbox.

Join 748 other followers